CM-3600D :: Spectrophotometer
Výrobce: 
, Japonsko
Stručný popis
Profesionální měřicí přístroj po měření barevných vlastností materiálů. Přístroj dokáže měři jak remisní tak transmisní charakteristiky materiálů, tj. spektrální činitel odrazu a prostupu světla. Měření probíhá v rozsahu vlnových délek 360-740nm a jako zdroj světla jsou použity čtyři xenonové výbojky s možností aktivace UV filtrů 400 a 420nm. Měření probíhá výhradně přes počítač, neboť přístroj sám nemá žádný displej. Obslužný software SpetraMagic dokáže naměřená data zpracovat do nejrůznějších reportů, vyčíslit prakticky všechny kolorimetrické informace v různých souřadných systémech.
Specifikace
| Illumination/observation system | Reflectance: d/8 (diffuse illumination/8-degree viewing), equipped with simultaneous measurement of SCI (specular component included)/ SCE (specular component excluded) Conforms to CIE No.15, ISO7724/1, ASTME1164, DIN5033 Teil7 and JIS Z8722 condition C standard. Transmittance d/0 (diffused illumination, 0-degree viewing) standard. Transmittance: d/0 (diffused illumination/0-degree viewing) Conforms to CIE No.15, ASTME1164, and DIN5033 Teil7 standard. |
| Light-receiving element | Silicon photodiode array(dual 40 elements) |
| Spectral separation device | Diffraction grating. |
| Wavelength range | 360 to 740nm |
| Wavelength pitch | 10nm |
| Half bandwidth | Approx. 10nm |
| Reflectance range | 0 to 200%; resolution: 0.01% |
| Sphere size | ř 152mm |
| Light source | Pulsed xenon lamps (X4) |
| Measurement time | Approx. 1.5 seconds |
| Minimum interval between measurements | Approx. 5 seconds |
| Measurement/illumination area | LAV: ř 25.4mm/ ř30mm MAV: ř 8mm/ ř 11mm (Selectable) SAV: ř 4mm/ ř 7mm |
| Repeatability | Spectral reflectance: Standard deviation
within 0.1% | Colormetric values: Standard deviation within ΔE*ab 0.02 |
| Inter-instrument agreement(LAV) | mean ΔE*ab 0.15 (SCI) based on 12 BCRA Series II color tiles compared to values measured with master body. |
| Temperature dependence | Spectral reflectance: Within ±0.10%/şC Color difference: Within ΔE*ab 0.05/şC |
| UV adjustment | Instantaneous numerical adjustment |
| UV cut filter | 400nm cutoff and 420nm cutoff |
| Transmittance chamber | Width: 133mm; depth: approx. 50mm; measurement dia.: approx. 17mm Transmission sample holder (Optional accessory): Sample holder; for both plate-shaped and liquid samples (removable) |
| Interface | RS-232C, D-SUB 9-pin (female) terminal |
| Power | AC 120V//230V 50/60Hz (Using included AC adapter) |
| Operation temperature/humidity range | 13to 33şC, less than 80% RH (at 33 with no condensation); Installation category: 1; pollution degree: 2 |
| Storage temperature/humidity range | 0 to 40şC, less than 80% RH (at 33 with no condensation) |
| Size(W x H x D)/weight | 244 x 208 x 378mm (9-5/8 x 8-3/16 x 14-7/8 inch), 12kg (26-7/16 lb.) |
| Standard accessories | White Calibration Plate, Target Mask (ř4mm), Target Mask (25.4mm), Zero Calibration box, AC adapter, Dust Cover, Accessory Case, Unit Driver, RS-232C Cable (9-pin, 2m) |
| Options | SpectraMagic,SpectraMatch, or SpectraQC (software), Transmittance Specimen Holder, Cell (2mm) / (10mm) / (20mm), Transmittance Zero Calibration Plate, RS-232C Cable (IBM, PC/AT 5m) / (IBM, PS/2 2m) / (IBM, PS/2 5m) |